Bolster Armouries AEGIS Advanced M4 AEG | Patrol Base | Custom Airsoft (2024)

This RIF comes with a 24 Month or 200,000 round count (whichever comes first) Warranty and Service plan.
Find out more here.

Your Bolster Armouries AEGIS will require regular routine maintenance. See our Bolster Armouries Maintenance Guide for more information.

Bolster Armouries was founded with one primary mission: To provide Airsofters with a range of RIFs which has been fine-tuned to provide the absolute peak in attainable performance together with breath-taking external quality. Each of our replicas is hand-assembled by some of the most experienced Airsoft gun techs in the industry and is built to an exacting standard.

Conceived with the modern Airsofter in mind, Bolster Armouries RIFs sport some of the finest internal and external upgrades available on the Airsoft market today and are guaranteed to provide unparalleled performance. To underline their dedication to their products, every Bolster Armouries RIF is issued with a dedicated extended warranty and service package, ensuring you get the complete experience the creators intended.

As most will instantly realise, the AEGIS is Bolster Armouries' take on the up-and-coming L403A1/KS-1, the latest service rifle of the British Armed Forces. Initially intended for the Royal Marine Commandos, the L403A1 is currently in the trials and development stage but is slated to be issued to the UKSF along with the Royal Marines to supplement and eventually replace the ageing but iconic SA80/L85 and L119A1 rifles.

Having mastered building world-beating AEGs which are more than a match for anything else you can buy off-the-shelf, the Bolster Armouries team set its sights on offering the same incredible performance showcased in the ONYX, ARKOSE, ATLAS, VULKAN and OBIRE platforms to those with a Milsim leaning. The AEGIS is the result, exchanging discrete yet stylish external design choices for a no-frills, cold and calculating military approach while maintaining the game-changing performance which put Bolster Armouries on the map.

While parts to build a KS-1 GBBR are slowly trickling into the Airsoft aftermarket, an AEG version is as yet unobtanium. As such, the AEGIS required a custom-made 13.7-inch dimpled outer barrel matching that of the real KS-1 to be paired with the Knights Armament licenced G&G SR15 E3 receiver, the closest AEG receiver style to the real steel KS-1.

The Airsoft Artisan URX 6 handguard replaces the original G&G URX 4, outfitting the AEGIS with a flawless replica of the real steel KS-1 handguard equipped with M-LOK slots and a 20mm Picatinny top rail, with all the details, authentic markings and flawless matching Airsoft Artisan is known for. Up front, the Angry Gun QDC/MCQ-PRT suppressor complete with suppressor shroud and steel QDC tri-prong flash hider dominates the overall aesthetic with its squat and brutal form, allowing you to run the AEGIS as the Royal Marines would or quickly detach it when the mission requires.

To complete the KS-1 styling, the AEGIS is equipped with an authentic Magpul CTR stock, the exact stock used on the L403A1 and widely regarded as the best carbine stock in the world with a proven history of strength, reliability and comfort. The CTR is paired with the PTS Syndicate EPG pistol grip, the gold standard in Airsoft pistol grips and a dead ringer for the Magpul MIAD pistol grip used on the real steel KS-1 rifle.

Inside, things get even better! While aesthetics are a big part of a Bolster Armouries build, a Bolster is only a Bolster when it can outshoot everything else on site. Inside, you'll find the usual complement of high-end internal upgrades, hand-fitted by talented and proven techs with the objective of achieving perfect performance.

All the biggest names, from Laylax Prometheus to Warhead Industries and FPS Softair feature inside and all parts are tuned to perfection, with the Gate TITAN V2 with its newest “Expert” firmware acting as the brain of the platform. Adding to its box of tricks, the TITAN now communicates directly with the ESC module on the Warhead Industries 36K CNC Black Brushless Motor, meaning the Bolster bar is raised further still when it comes to electrical efficiency and rate of fire.

A new additionto the Bolster Armouries formula is the 14.5 Steel Tooth Pistonfrom Airsoft upgrade legends RetroArms, machining masters at the cutting edge of innovation. The RetroArms piston offers superb strength and ultra-low weight in equal measure, enough to get the most out of the earth-moving torque provided by the Warhead Brushless Motor.

Also inside are the NOVA CNC Trigger, Power Piston Head and Protector Cylinder Head from Gate Electronics, finished in Bolster Armouries custom violet anodisation. Commissioned by Bolster specifically for its complete builds and not available separately, these gorgeous CNC aluminium parts give those in the know a subtle indication that this KS-1 replica has had the Bolster Armouries custom touch.

If the mass-produced guns from other manufacturers are the equivalent of a Ford, a Bolster Armouries AEG is a Rolls Royce; crafted with care, to perfection, with the highest quality parts available and a distinctive external look leaving onlookers in no doubt that this is a Bolster Armouries AEG.

Bolster Armouries AEGIS Advanced M4 AEG

The AEGIS is forged around the G&G SR15 E3 AEG base gun, an officially licenced replica of the Knights Armament Company SR15 rifle. While the SR15 is beautifully made and a perfect replica of the real thing, it requires significant external changes to match the real steel KS-1, including the use of parts which simply don't exist yet for Airsoft AEGs.

First and foremost, the outer barrel needed changing to match the length and profile of the KS-1; something which can only be achieved with custom-made parts. As such, the Bolster team commissioned their 13.7" dimpled AEG barrel to ensure the AEGIS has the correct barrel length to handguard length ratio; a big part of the KS-1 look. This distinctive outer barrel is made from the original G&G outer barrel; shortened, rethreaded and machined with iconic KAC style dimples to complete the look. The dimples are visible through the Airsoft Artisan handguard M-LOK slots and the barrel length is absolutely spot on, providing a sleek, integral look with the Angry Gun QDC/MCQ-PRT suppressor mounted.

The beautifully machined and flawlessly authentic Airsoft Artisan KS-1 handguard is what gives the AEGIS its instantly recognisable KS-1 silhouette, matching the real thing perfectly, including all of the small changes from previous URX handguards. Realistic markings are present on the collar of the handguard, the QD sling sockets of the URX4 have been correctly deleted and M-LOK slots are present at the 3, 6 and 9 o'clock positions along with the offset angles, ready for your choice of mission essential accessories.

The receiver is the only part of the AEGIS build which isn't an exact match for the real thing, though it is as close as possible with current AEG receiver options. Being an officially licenced Knights Armament Company SR15 receiver, KAC markings are present on each side of the magazine well; the ambidextrous fire selector, magazine release and bolt release catch are all on board and the ambidextrous QD receiver end plate is fitted, ready for a QD sling swivel on either side. The only deviation from the KS-1 design is the orientation of the bolt release catch on the right side; the AEGIS has a horizontally oriented bolt catch ala the real SR15 and the real KS-1 has a vertically oriented catch mirroring the original catch on the left side of the receiver.

Trademarks-wise, the left side of the receiver includes the iconic Knights Armament logo with "STONER RIFLE" engraved just above, named for the creator of the AR-15, firearms design legend Eugene Stoner. On the right side, we have "SR15 5.56mm", "KNIGHT'S MFG. CO." and "TITUSVILLE, FL" and "USA" just below. While they may not be perfectly accurate to the real KS-1 in some places, the markings are 90% a match for the real thing, are deeply and precisely engraved and as close to the markings of the genuine KS-1 as can be achieved with an Airsoft AEG.

The ambidextrous fire selector switches are authentically replicated on either side of the lower receiver, just above the pistol grip in a very accessible location; one of the traits the AR-15 platform is known and loved for. The selector switch provides 3 positions; Safe, Semi-automatic, and fully automatic with a 90-degree throw between each mode and is mirrored on either side to allow left and right-handed shooters to operate this essential control intuitively. The right side selector switch is scalloped in classic Knights style, ensuring you don't get finger fatigue hammering the trigger, instead experiencing the thoroughbred ergonomics high-end KAC AR-15 rifles are known for.

The magazine release is also ambidextrous, positioned on each side of the magazine well for intuitive handling whether you're left or right-handed. A drop-free design ideal for speedy reloads, this magazine release is a push-through design well protected on all sides against inadvertent activation. This is one of the many improvements made by Knights Armament to the legendary AR-15 design which has lasted the ages, first used on the SR15 in the URX2 era along with the US Army's M110 SASS sniper rifle and still doing the job on Knights Armaments' latest design, the KS-1.

At the top rear of the receiver, we have a KAC-style extended charging handle, providing easy access to the HOP-up unit, even for gloved users. Pulling the handle back will open the steel dust cover and retract the mock bolt, revealing the distinctive white HOP-up adjuster dial of the innovative Retro Arms CNC HOP-up unit. Adjustments should be applied until your projectiles follow the flattest possible trajectory and for best results, the Bolster tech team recommends using .

The rear of the receiver is equipped with an authentic replica of the KAC ambidextrous QD sling mount, offering a QD sling socket on either side of the AEGIS, ready for the most modern sling setups to be mounted via QD sling swivels. QD Sling setups are a more user-friendly alternative to standard sling loops, allowing you to quickly and intuitively disconnect your platform from your sling and reconfigure as necessary. Those who prefer a more conventional sling, fear not! The authentic Magpul CTR stock at the rear is equipped with footman loops, ready for retro sling solutions.

Following the sling plate, the timeless M4/AR-15 buffer tube follows, offering 6 adjustment positions for the pre-installed CTR stock. The buffer tube also serves as the battery compartment, ideally suited to 11.1V 1450mAh LiPo batteries, one of which are included in the AEGIS package. To access the battery compartment you can either remove the rubber butt plate via its Allen bolts or pull the stock adjustment pin all the way out and slide the stock off the tube to the rear. Each adjustment position is also numerically marked on the buffer tube with laser engraving, saving you time when getting ready to rock pre-skirmish!

Airsoft Artisan L403A1/KS-1 URX 6 M-LOK Handguard

Being intended for Milsim skirmishers and those looking for a detailed military-style replica, the AEGIS build would not be complete without one of the few KS-1 appropriate parts available currently on the Airsoft market; the Airsoft Artisan L403A1/KS-1 M-LOK Handguard. Machined to perfection with craftsmanship exceeding even the original G&G URX4, the Artisan KS-1 handguard is a perfect match for the real deal, down to every angle and detail with a robust yet silky-smooth anodised finish.

The upper surface of the L403A1 handguard is equipped with a precisely machined 20mm Picatinny rail, ready for your choice of accessories whether you want to deck your build out like a real KS-1 in the field or run it slick. At the 3, 6 and 9 o'clock positions, we have M-LOK negative space attachment slots with additional slots at the offset angles, giving you unparalleled flexibility in where you mount your M-LOK mission essentials or 20mm rail adapters.

The handguard also includes the URX6-specific gas block cutout at the "mid-length" position and correctly deletes the QD sling points of the URX4, making it a perfect match for the real L403A1 handguard. The only difference we can find is that the Artisan L403A1 handguard uses an integral barrel nut like the URX4 but the real URX6 reportedly uses a separate nut, though this is not noticeable from the outside and won't make a difference to the AEGIS' versatile build, dynamic looks or game-changing performance out on the field.

Bolster Armouries Custom 13.7" Dimpled Outer Barrel - Aluminium - 14mm CCW Male Threading

To complete the KS-1 look, a custom outer barrel is an absolute must as the Airsoft aftermarket does not yet offer the correct barrel length and profile for an authentic build. While the original G&G SR15 outer barrel is spot on for the SR15, it required extensive machining work to be a closer match for the KS-1 in the configuration in which it will serve the British Armed Forces.

To start, the barrel length was reduced by 0.8 inches and rethreaded at the tip with 14mm CCW male threading, ready for the Angry Gun QDC/MCQ-PRT suppressor. Along its entire length, the barrel was machined with the iconic KAC dimples seen on the KAC PDW and other Knights Armament firearms, visible through the ports of the Airsoft Artisan handguard and an essential part of the real steel KS-1 build.

In real steel terms, the dimples are designed to function similarly to barrel fluting; assisting with cooling by increasing the barrel's surface contact with the air while allowing for a heavier barrel profile without adding excessive weight. When it comes to Airsoft, this is just for the look but the weight reduction from the dimples gives the front end of the AEGIS a more nimble feel, allowing you to sweep quickly between multiple targets and keep the muzzle under control while operating at full speed.

Genuine Magpul CTR Stock

The Magpul CTR stock is widely regarded as the best AR-15 carbine stock available for the vast majority of applications and is designed to be used with AR-15 rifles with a mil-spec buffer tube. This stock has been used by the US Army Special Forces, US Navy SEALS, and our own UKSF, the special forces directorate comprising the SAS, SBS, SRR, and SFSG (1 PARA). Being so well-liked in the UK Armed Forces made the CTR the perfect fit for the real steel L403A1 and thus, the Bolster Armouries AEGIS.

The CTR is an "A-frame" design, intended to keep the weight of the stock to a minimum whilst retaining optimal strength. The adjustment latch of the CTR is concealed within the A-frame design, avoiding snagging on slings or other equipment, and keeping the latch shielded from inadvertent activation. A premium chrome-silicone lock spring is used in the adjustment mechanism to provide dependable locking and long life.

The top of the stock has a sloping profile to provide a comfortable cheek weld whilst retaining a slim footprint. The sling mounting options provided on the CTR stock include; a QD sling socket on either side (accommodates up to 1.5" swivels), 1.25" sling loops on the bottom of the A-frame and at the rear, and a lanyard hole at the toe of the stock which is perfect for custom paracord sling solutions.

The CTR also features a "friction lock" system, intended to eliminate any wobble between the stock and buffer tube for enhanced weapon stability and a premium feel. The adjustment latch includes moulded in linear texturing to ensure that when you need to make an adjustment, there is no chance of slipping off the latch. The friction lock can be found on the bottom of the stock, at the front, and will pop open when the adjustment latch is pressed. After selecting your adjustment, simply squeeze the friction lock closed to eradicate any movement in the stock.

To ensure the stock stays firmly in your shoulder the CTR includes a removable 0.3" rubber butt pad with an anti-slip surface which also serves to increase impact protection in case the rifle is dropped on the stock. This stock has been copied by a plethora of Chinese factories, but the copies are known for their, to put it mildly, "approximate" tolerances, and have been the cause of many facial injuries when used on real rifles. The use of a genuine Magpul CTR on the AEGIS affords it the best stock money can buy and the exact stock used on the real L403A1/KS-1 rifle; an advanced design and inherent strength of Magpul's advanced high density polymer.

PTS Syndicate EPG Pistol Grip

The Bolster Armouries AEGIS is rocking the advanced EPG Pistol grip, offering a highly supportive design with a curved extension to help you maintain a comfortable hold and protect the web of your hand whilst manipulating the platform in a dynamic environment. The EPG is constructed from Dupont Zytel, a high strength, abrasion and impact-resistant thermoplastic polyamide/nylon, aka, the best of the best when it comes to high density polymer.

With comfortable dot texturing on either side and crackle texture on the front strap and backstrap, the EPG is the perfect enhancement to ensure an AEGIS-wielding player maintains a positive grip on the rifle in any weather condition, even while wearing thick gloves.

The EPG was chosen partially because it is the best aftermarket AEG grip money can buy and its very similar profile to the popular Magpul MIAD grip used on the real steel KS-1, echoing the MIAD's excellent reputation for providing a comfortable grip which suits a wide variety of hand shapes and sizes.

Angry Gun QDC/MCQ-PRT KS-1 Suppressor

One of the most cutting-edge aspects of the L403A1/KS-1 is its QDC/MCQ-PRT suppressor, complete with a tri-prong flash hider, compact QDC suppressor and suppressor shroud. The shroud is designed in the real world to function similarly to popular "Manta" suppressor covers, reducing thermal signature to prevent OPFOR using night vision, thermal optics and vehicles with FLIR to pinpoint an operator's position.

The QDC/MCQ-PRT suppressor is constructed from CNC-machined aluminium and is flawlessly finished and rocking realistic markings, as we would expect from Angry Gun. To mount the QDC/MCQ-PRT, its innovative QD mechanism requires you to index the pin on the flash hider with the corresponding groove inside the suppressor collar. With this done, turn the shroud counter-clockwise (with the front of the suppressor facing away) to tighten and lock the suppressor in place. To remove it, simply reverse the process if you fancy a less clandestine look and want to show off the detailed steel KAC Tri-Prong flash hider and hear its beautiful tuning fork ring!

MCQ stands for "Mini Close Quarters", reflecting the design requirements of the real steel suppressor. At only 4 inches overall length, the QDC/MCQ-PRT setup adds very little extra length to the AEGIS, keeping the build adaptable and flexible; equally suited to close-range engagements and outdoor operations. The shroud of the QDC/MCQ-PRT can also be removed from the suppressor to reveal its inner beauty but we don't recommend doing this regularly as the process can cause damage. It would be a real shame to ruin the QDC/MCQ-PRT's beautiful finish!

Internal Enhancements

As with previous Bolster Armouries releases, the internal parts present in the Bolster Armouries AEGIS are hand-selected for the high quality materials used in their construction, as well as for their exceptional performance. Each Bolster Armouries Gearbox is hand-built, with each gear being perfectly shimmed for smooth operation, and the piston position also being corrected for the perfect Angle of engagement (AOE) to provide maximum efficiency and longevity.

This gearbox is matched with one of the most well-regarded steel tightbore inner barrels out there, renowned for its rigidity and high quality internal finish. This is paired with the latest and greatest CNC HOP-up unit to hit the market, the Retro Arms rotary HOP-up unit with its TDC Trolley and a Laylax/Prometheus Purple HOP-up rubber, based on the original Marui design but comprised of longer-lasting materials. Let's have a closer look at what goes into an AEGIS AEG, and why these parts are so noteworthy:

Laylax/Prometheus 6.03mm EG Inner Barrel - 285mm - Stainless Steel

Improves accuracy - Enhanced Air seal - Click for more info

The Prometheus 6.03mm EG inner barrel is constructed from SUS 304 stainless steel (also known as SS304 or AISI304), with a chromium content of between 18% and 20% and nickel content between 8% and 10.5%. This choice of material not only gives the inner barrel exceptional rigidity, but has higher corrosion resistance than other stainless steels, aluminium, or brass used in other inner barrels.

This inner barrel was chosen primarily for its reputation as one of the best AEG upgrades money can buy, but also for its precise dimensional tolerances which are guaranteed to be within 1/100th of a millimetre of the manufacturer's specs. This means we can confidently say your Bolster Armouries AEG will shoot straight and true, as long as you do your part! This part also serves as a great way to increase the FPS of an AEG by a small amount without adding additional strain to the gearbox, simply by using the compressed air provided by the piston more efficiently.

Laylax/Prometheus Purple HOP-up Rubber - Soft Rubber

Wear resistant - Improved HOP-up effect - Click for more info

Known amongst Airsofters as a "Prommy purple", the Prometheus Purple HOP-up Rubber is based on the original and proven Tokyo Marui HOP-up rubber design but is cast in a far more wear resistant rubber whilst maintaining the prerequisite softness necessary for a strong HOP effect.

This HOP-up rubber has become a household name in Airsoft, next to the Guarder Clear, but the Prommy purple has, in recent years become the HOP-up bucking of choice for those attempting a Flat HOP modification. This mod intends to increase the effect of the HOP-up by widening the area of contact with the BB and is generally home-brewed and can have wildly varying results, often requiring extensive testing and troubleshooting. This brings us seamlessly on to our next part...

Gate EON CNC HOP-up Chamber- CNC Machined Aluminium

Fine adjustments possible - Enhanced air seal - Click for more info

The Gate EON CNC HOP-up chamber and its rotary adjuster are constructed from CNC machined aluminium and the HOP-up arm, redesigned C-clip, and barrel spacer are made from CNC machined POM polymer to provide the precise tolerances necessary for optimal air seal and consistency down range. When put to the test, the Bolster Armouries tech team found that this unit is easily the equal of the Pro-Win HOP-up unit, their former favourite, but with a fresh new look and some thoughtful enhancements.

Gate’s innovative EON CNC HOP-up unit boasts several refinements even Pro-Win didn’t think of! The new C-clip has a protrusion in the bottom which interfaces with the indexing groove on AEG inner barrels to prevent rotation from compromising accuracy, the feed chute features an O-ring to prevent BBs from falling out when the magazine is removed and the adjuster/dial is now numerically marked so you can keep track of your HOP-up settings for different ammo weights and save setup time!

As with the other Gate CNC parts in both the ONYX Blackout and the ONYX [Violet Edition], the EON HOP-up unit is finished in the striking Bolster Armouries custom metallic violet with a metallic grey adjustment dial. This allows you to pull back the PTS Raptor charging handle to "pop the hood", showcasing the unique finish applied to this superb HOP-up unit which simply cannot be bought separately, marking your ONYX out as a truly unique custom build.

Maple Leaf Delayer OMEGA Nub - Hard Rubber

Wide contact surface- Stronger HOP-up effect - Click for more info

The Maple Leaf OMEGA HOP-up nub is intended to be a mass-produced alternative to the home-brewed R-HOP and flat HOP modifications of yesteryear. This provides the kind of performance you would expect from a very well made flat HOP modification, but with no chance of potential jams and considerably less likelihood of failure due to its single piece design.

The OMEGA nub has a concave contact surface, shaped to match that of a 6mm BB perfectly, providing HOP effect across the entire upper surface of the BB, instead of just a single point in the centre. This provides excellent side-to-side stability and an increased HOP effect, extending the range of the AEG into the borderline implausible!

Laylax EG 18:1 Hardened Steel Gearset - Heat Treated Japanese Steel

Ultra strong gear set - Smooth gearbox report - Click for more info

The EG Hardened Steel Gear Set from Laylax is a standard ratio gearset constructed from heat-treated Japanese steel, widely regarded as one of the strongest standard ratio gear sets on the market. Each individual gear is shimmed to perfection to remove any lateral movement and mesh cleanly, an essential process when a Warhead Industries 36K Brushless Motor is involved!

Laylax, also known as "Prometheus" or "First Factory" has been a household name in the area of AEG upgrade parts for over a decade. Many experienced techs have relied on Laylax parts to keep their high-performance build running in the long term, including the Bolster Armouries techs. Having had no gear failures thus far in previous Bolster Armouries and Bolster Tuned builds, the Bolster tech team are confident these high-grade gears combined with professional shimming will provide the superb long-term exceptional reliability and smooth functionality a full-fat Bolster build needs.

Gate Protector Cylinder head - CNC Machined Aluminium - Bolster Armouries Violet

Double O-ring configuration - Reduced stress on the gearbox shell - Click for more info

The Gate Protector CNC aluminium cylinder head is constructed from CNC machined aircraft grade aluminium to an extremely high degree of precision. The Protector is designed to ensure the nozzle aligns perfectly with the nozzle guide on the cylinder head itself to prevent feeding and FPS fluctuation issues due to what is known as “mid-cap syndrome”.

The Protector is also fitted with a shock-absorbing rubber bumper which functions the same way as the AirLab Sorbothane pad used in previous Bolster builds, reducing wear and stress on the gearbox shell and limiting wear on the piston head. To ensure we get the air seal qualities we should with a precise CNC machined part, the Protector also has a dual O-ring configuration around its circumference to completely close the gap between the cylinder and cylinder head.

The Protector variant used in the AEGIS is finished in Bolster’s unique metallic violet which is unfortunately not visible from the outside. What a shame! Nonetheless, the metallic violet colouration of this part is your certificate of authenticity as this finish is exclusive to Bolster Armouries builds and not available separately.

Gate Power CNC Aluminium Hybrid Piston Head - CNC Machined Aluminium - Bolster Armouries Violet

Corrects Angle of engagement - Perfect Air Seal - Click for more info

As with the ‘Protector’ cylinder head, the Gate Power Hybrid Piston Head is constructed from aircraft-grade aluminium using CNC machining technology to provide the tight tolerances necessary for a perfect fit between the cylinder walls and piston head along with flawless air seal qualities. The Power Piston Head is also finished in Bolster Armouries' unique metallic violet, though it is hidden from sight inside the gearbox shell.

The Power piston head features a pair of O-rings around its circumference to completely seal any gap between the cylinder and the piston head itself, completely eliminating air leaks to ensure that all the compressed air generated by the gearbox is translated into downrange effect.

Supplied with an AOE correcting spacer as well as special weight pads which allow for tuning for optimal performance with various weights of ammo, as you will receive it, the Power piston head is configured perfectly for the AEGIS internal setup and the G&G Armament 0.28g BBs the Bolster Armouries team recommend.

FPS Softair STEEL CYLINDER TYPE “D” - CNC Machined Steel

Extremely tight tolerances - Polished inner surface - Click for more info

FPS Softair parts are manufactured in Italy by Airsofters who share the Bolster Team’s passion for high performance and superlative quality Airsoft upgrades. The FPS Cylinder chosen for the AEGIS is the Type D model, providing the perfect air volume for the Prometheus 285mm 6.03mm tightbore inner barrel, meaning no power is lost through “suck back” and providing a flawlessly efficient air seal system.

The FPS Steel Cylinder is ribbed on its exterior, but not for her pleasure! The role of these ribs is to more effectively seal the walls of the cylinder with those of the gearbox shell to prevent any air from leaking out. The inside of the cylinder is polished to a near-mirror finish, meaning minimal friction and minimal energy lost as the piston reciprocates back and forth.

Having a high quality cylinder installed is another way the Bolster Armouries AEGIS gearbox maximizes efficiency, squeezing every last bit of usable air from each piston cycle, giving you higher FPS without adding strain to the gearbox.

FPS Softair Carbon Fibre Reinforced Tappet Plate - Carbon Fibre-reinforced High-density Polymer

Extremely Durable - Perfect Nozzle Alignment - Click for more info

The FPS Softair Carbon Fibre reinforced tappet plate is now a proven part in Bolster Armouries builds, chosen based on the superb quality and high performance bar set by other FPS Softair parts. Ideal for a build designed for high speed and precision in equal measure which requires perfect nozzle alignment, the tappet plate is constructed from carbon fibre-reinforced nylon polymer. This provides the perfect amount of rigidity and flex without being vulnerable to sudden fractures under heavy load as a conventional polycarbonate tappet might.

The tappet plate is an essential part when it comes to ensuring the AEG's internals are timed correctly and that feeding is smooth and constant. The FPS Tappet has an absolutely flawless shape, the perfect amount of strength while avoiding being so hard it becomes brittle, and its carbon fibre reinforced polymer gives it the edge in durability over every other tappet on the market; perfect for a real beast of an AEG like the AEGIS.

Gate NOVA CNC Aluminium Enhanced Trigger 2B1 - CNC Machined Aluminium - Bolster Armouries Violet

Adjustable trigger travel - Ultra-responsive trigger - Click for more info

The Gate NOVA CNC aluminium trigger allows for adjustable pre-travel and over-travel via two grub screws, one in the trigger body to adjust pre-travel, and one in the rear extension to adjust over-travel.

Designed to mimic competition-optimised real steel AR-15s, the trigger adjustment allows you to tune the NOVA to suit your requirements and is a popular upgrade for those who want the absolute fastest rate of semi-auto fire. An adjustable trigger is a formidable addition for those who require rapid semi-auto and victory through volume of fire; a true asset to the build objectives of the AEGIS.

The front face of the chosen variant, the “2B1” is smooth but has bevelled edges which keep things comfortable when rapid firing by removing "hot spots" which may cause discomfort over long durations. In the AEGIS, we expect you will be using this part quite a lot, and the 2B1 style was chosen as the best option both for rapid semi-auto double taps and finger fatigue-free full auto mayhem!

Finished in Bolster Armouries’ custom metallic violet, this variant of the NOVA CNC trigger is not available separately, giving the AEGIS a custom touch not found on anything other than a Bolster Armouries custom build.

Retro Arms 14.5 Steel Tooth Piston - Reinforced Polymer with Carbon Steel teeth

Low weight improves cyclic rate - High strength teeth - Click for more info

The RetroArms 14.5 Steel Tooth piston is comprised of two parts, combined to provide the best compromise between keeping the weight low, and the rigidity high. The piston body is constructed from carbon fibre-reinforced polymer, providing ample strength to resist the strain from rapid cycling while keeping excess weight to a minimum.

The piston teeth which mesh with the steel sector gear are constructed from high carbon steel to provide the rigidity required for long-term use alongside the Warhead CNC Black Brushless Motor turning the Laylax 18:1 gearset at an incredible rate under spring tension. Despite its steel tooth rack, the RetroArms piston weighs a mere 18g, keeping it well within the design parameters of the upgraded AEGIS gearbox.

Bolster Armouries M120 Spring - Ferrosilicochrome with Zinc coating

Reduces strain on the gearbox internals - Corrosion Resistant - Click for more info

The Bolster Armouries M120 spring is constructed from SiCr Alloy (also known as Ferrosilicochrome), with a zinc coating to discourage corrosion. This Alloy is well known for its use in manufacturing springs for the automotive industry and many others requiring static torsion loaded springs with high corrosion resistance.

The spring is a non-linear design, reducing strain on the gearbox by varying the coil tension over the course of compressing the spring. This means the spring design takes advantage of the points in the cycle of the AEG where the piston is in the best position to handle the high strain, such as the midpoint while reducing the initial load on the piston teeth.

This M120 spring has closed and flattened ends which reduce wear on the piston and minimize the chance of it failing. The Bolster Team had these springs made this way in order to reduce the strain on the internal components in the high speed Bolster gearbox while providing the necessary velocity, and its design which provides optimal performance with the Laylax 6.03mm stainless steel tight bore inner barrel.

Bolster Armouries EZO Open Steel Bearings - Heat Treated Japanese Steel

Ultra-low Friction - Extremely Strong - Click for more info

Bolster Armouries EZO Ball-Bearing Bushings are designed and manufactured by Sapparo Precision Inc. in Japan and have been chosen by the Bolster team thanks to their extremely low friction, high-quality steel construction, incredible strength and fantastic reputation in a wide range of industries.

Specialists in medium and miniature ball bearings, Sapporo Precision bearings have a wide range of applications; in this case, reducing friction and extending the lifespan of the finely tuned Bolster Armouries AEGIS. These bearings allow the gears to spin freely at the tremendous rate provided by the Warhead CNC Black Brushless Motor with minimal chances of failure, all while reducing stress on the gearbox shell and gear axles.

FPS Softair CNC Delrin® Polymer Air Nozzle with Inner O-Ring - CNC Delrin® & Rubber

Highly Durable - Perfect Nozzle Alignment - Click for more info

The FPS Softair CNC Delrin® Polymer Air Nozzle is constructed from CNC machined Delrin®, a high strength, low friction acetal homopolymer designed for high load mechanical applications and often used as a replacement for metal in doors, conveyors, zip fasters and medical delivery devices.

Representing the first use of this type of polymer for Airsoft applications (as far as we know), FPS Softair is ever the innovator, always looking for better ways to do things with the foundation of its engineering prowess.

Being CNC-finished, this nozzle has incredibly tight tolerances, a low friction finish and unbeatable strength when it comes to polymer air nozzles. Its inner O-ring only adds to its effectiveness, positively eliminating air leaks for maximum consistency, translating into pinpoint accuracy downrange.

The perfect pairing for the FPS Softair Carbon Fibre Reinforced Tappet Plate, the CNC Delrin Polymer Air Nozzle has a plethora of benefits over stronger but heavier aluminium nozzles. Being polymer, the nozzle has almost no chance of damaging the Gate EON HOP-up unit over time and puts minimal stress on the tappet plate thanks to its low weight.

An equivalent aluminium nozzle could destroy even the best HOP-up units on the market should the nozzle become misaligned, which is entirely possible due to the extra stress placed on the tappet plate by the heavier aluminium part.

FPS Softair’s inventive use of Delrin® Polymer provides ample strength for long term durability without causing other parts to take excess wear, making it perfect for Bolster Armouries' objective of providing a fully upgraded AEG at the absolute pinnacle of performance with the robust and considerate design intended to continue to perform in the long term.

Gate TITAN MOSFET V2 Expert Firmware

Improves efficiency - Provides pre-cocking function - Protects circuitry

Gate Electronics is well known amongst Airsofters for providing some of the best MOSFETs the Airsoft industry has to offer. These include the basic X-ASR which provides battery protection, the ASTER which adds GATE Control station App functionality, and the Gate's flagship option, the TITAN. The TITAN takes the already well equipped Bolster Armouries AEGIS and transforms it from an extremely well tuned AEG into the realms of an advanced training weapon.

The TITAN provides a plethora of functions, including trigger travel adjustment, pre-cocking, Burst mode, Binary trigger, and adaptive active braking. A total of 8 optical sensors within the TITAN are used to track the movement of the gears, piston, and trigger to ensure the gears complete a full cycle with each trigger pull and the gears stop exactly where they should. The TITAN MOSFETs installed in the Bolster Armouries AEGIS are pre-setup with the optimal settings for the platform and provide instantaneous trigger response and premium level functionality, including protection against over-discharge of your battery, short-circuits, and overheating.

Unlike other advanced MOSFETs, the TITAN has remarkably low power consumption and includes a "sleep mode" which activates when the AEGIS has not been fired for some time. This protects your battery in the event that you forget to disconnect it after a skirmish, while other MOSFETs may drain the battery entirely over time, rendering the battery useless.

The settings programmed into the TITAN MOSFET by the Bolster Armouries tech team have been selected to provide the absolute optimum settings for the AEGIS platform. The pre-set configuration includes pre-cocking set to medium speed for the best balance between prolonging the lifespan of the internals and providing the highly responsive trigger pre-cocking setups are known for.

A new trick up the legendary TITAN’s sleeve is its Expert firmware, now provided by default with every new Gate TITAN MOSFET. The Expert firmware allows for even more customisation options than ever before, but as with previous Bolster builds, the team advise you to stick to the settings they have programmed in to avoid causing undue wear and upsetting the delicate ecosystem inside the AEGIS.

Another improvement in the latest TITAN update from Gate is the ability for the TITAN to communicate with the Warhead Industries Electronic Speed Control module installed on the CNC Black Brushless Motor. This enhances electrical efficiency, improves rate of fire and allows the incredible power of the Warhead Brushless motor to be fully unleashed while keeping everything in time and avoiding excessive strain. The TITAN and Warhead Motor combo has always been a match made in heaven and is now better than ever before.

Warhead Industries CNC Black Brushless Motor 36K RPM - CNC Aluminium housing - SH Rated Magnets

Reduces heat build-up - Exceptionally high rate of fire - Electronic speed control

The motor is perhaps the most important part when it comes to providing extreme levels of performance in an Airsoft AEG, though with a faster motor comes the need to upgrade other internal components to prevent premature failure. In a home build, this often results in an "arms race" of parts so to speak, as whenever a part is upgraded it will require another part to be upgraded to prevent damage and maximize the AEG's potential.

The Bolster Armouries tech team is confident that their gearbox internals are the best available, and the only motor option that provides the speed, smooth running, and longevity to get the most out of the other enhanced parts would be the Warhead Industries Ultra High Speed motor. Known for their innovation and pushing the limits of Airsoft performance, Warhead Industries provide the best Airsoft motor around; utilizing the most up-to-date technology to provide a previously unheard of torque to weight ratio, and impressive heat dispersion.

The Warhead motor is housed inside a CNC machined 7075 aluminium shell with ribs machined in to reduce heat build-up within the motor, avoiding one of the primary causes of motor failure with their pioneering design. Utilizing "brushless" motor technology, the Warhead Ultra High Speed motor is considerably quieter than a standard motor, and uses superior quality Neodymium magnets combined with a hand-wound, temperature-resistant copper stator wind to provide its incredible 36,000 revolutions per minute cyclic rate.

Conventional brushed motors suffer immensely from heat build-up when operated for more than 30 seconds continuously, due to the high internal friction generated. In a brushless motor, the main source of heat build-up is simply friction with the air which can be kept at a manageable level for far longer. With the Warhead motor installed, your trigger finger will get tired far sooner than your AEGIS AEG will!

This motor also includes an Electronic Speed Control (ESC) module, which is hidden beneath a CNC machined aluminium cover at the base of the motor. This circuit controls and regulates the speed of the motor whilst providing low voltage cut-off and over-current-draw protection, providing an additional level of safety for your high performance Bolster Armouries AEGIS.

If the incredible performance of the ONYX series made your jaw drop but you need a platform well-suited to the Milsim battlespace, the AEGIS Advanced M4 AEG brings the heat downrange with styling as close as possible to the British Armed Forces' cutting-edge KS-1.

A peerless, mission-ready platform just waiting for your choice of optical sight and gucci accessories, the AEGIS offers the same skirmish-dominating effect on target and confidence-inspiring reliability as other Bolster Armouries builds with the Bolster tech team covering your six, ready to assist in the unlikely event you notice a performance drop.

Internal changes from previous Advanced M4 platforms evidence the extensive Bolster Armouries R&D process; an uncompromising search for the best possible combination of parts to reach the peak of Airsoft performance. Never content with copying and pasting the same parts into a new body, Bolster Armouries has honed the AEGIS to perfection having thoroughly tested innumerable combinations. What you see before you is the AEGIS in its ultimate form.

If owning a fully upgraded premium AEG without the worry, expense and time commitment of attaining and maintaining perfect performance is your objective, Bolster Armouries is here to provide just that. The Bolster Armouries expert tech team has done all the legwork, testing, troubleshooting, and setup, all you need to do is get out there and enjoy perfect Airsoft performance.

The most valuable part of the Bolster Armouries owners' experience is shooting safe in the knowledge that the unforgettable downrange results you experience will be maintained in the long run thanks to the 24-month extended warranty and service package supplied with each AEGIS. If anything changes, you won’t have to lift a finger other than to contact the Bolster Tech Team and they will get you back up and shooting at your best double-time.

With an aura of unbridled aggression and razor-sharp, clean styling, the AEGIS reaches out to 60 meters and beyond in its stride, subjecting the OPFOR to a devastating 28 to 30 rounds per second. Named for the shield of Zeus, an unbreakable bulwark as potent as it is protective, you'll be the God of the Airsoft battlefield with the AEGIS at your side.

Key Features

  • Custom Aesthetic - There is nothing else like it!
  • KS-1 Suppressor, Custom 13.7" Dimpled barrel & KS-1 Handguard - The closest you'll get to an AEG L403A1/KS-1
  • Warhead CNC Black Brushless Motor- The best motor on the market
  • GATE TITAN MOSFET with Expert Firmware - Unparalleled efficiency and trigger response
  • Gate EONCNC HOP-up unit- Gorgeous HOP-up, unbeatable range, flawless air seal
  • Real Steel Magpul CTR Stock - Widely regarded as the best carbine stock in the world

Package Includes

  • Bolster Armouries AEGIS Advanced M4 AEG
  • PTS 150rnd EPM Gen.2 Magazine w/Custom black mock rounds x 2
  • 11.1V 30C 1450Mah LiPo Battery
  • G&G KAC Flip-up Iron Sight Set
  • Bolster Armouries Service Book
  • Bolster Armouries PVC Patch
  • Gate TITAN PVC Patch
  • Patrol Base PVC Patch
  • Cleaning/Unjamming Rod
  • HASTA Large Rifle Hard Case
Bolster Armouries AEGIS Advanced M4 AEG | Patrol Base | Custom Airsoft (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Virgilio Hermann JD

Last Updated:

Views: 6801

Rating: 4 / 5 (41 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Virgilio Hermann JD

Birthday: 1997-12-21

Address: 6946 Schoen Cove, Sipesshire, MO 55944

Phone: +3763365785260

Job: Accounting Engineer

Hobby: Web surfing, Rafting, Dowsing, Stand-up comedy, Ghost hunting, Swimming, Amateur radio

Introduction: My name is Virgilio Hermann JD, I am a fine, gifted, beautiful, encouraging, kind, talented, zealous person who loves writing and wants to share my knowledge and understanding with you.